1. Slice Dead
Searching...

Slice Dead

Home › Forums › FABRIC General Questions and Discussion › Slice Dead

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 26, 2024 at 9:09 am #7181
    Vaiden Logan
    Participant

      Hello, I have a slice that has somehow ended up dead despite the end of the lease not being until 2024-11-02 15:45:33. Is there a way to recover the slivers?

      Was using fablib 1.6.2

      ID 61c1d373-b3b6-472f-a34a-3dd6dac8c809
      Name ServiceX_NDN_Proxy_tcp_4nodes
      Lease Start (UTC) 2023-11-14 15:36:00 +0000
      Project ID 7a5adb91-c4c0-4a1c-8021-7b6c56af196f
      June 26, 2024 at 11:33 am #7184
      Komal Thareja
      Participant

        Hi Vaiden,

        Unfortunately, it is not possible to recover the slivers once deleted. I will look at why the slice was closed before the end date. However, I do suspect that Extend/Renew may have failed for certain slivers. I will look more and share details here.

        Thanks,

        Komal

        June 26, 2024 at 2:13 pm #7187
        Komal Thareja
        Participant

          Hi Vaiden,

          I have checked the logs and don’t see any errors. Looks like your slice was modified multiple times.

          Some of the resources closed on 2024-05-18 18:27:07 +0000 while all other had expiry date set to 2024-11-02 19:45:33 +0000. Is it possible that the slice deletion was triggered by you on accident?

          I have no evidence of software deleting it due to expiry as per the logs.

          Could you please share if there were any recent actions taken on the slice? Trying to see if this can be recreated.

          Appreciate your help with this.

          Thanks,

          Komal

          June 27, 2024 at 10:51 am #7192
          Vaiden Logan
          Participant

            Yes, I’ll try to gather a record of the changes we made and send them your way.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.