1. FPGA valid sites for Esnet toolchain
Searching...

FPGA valid sites for Esnet toolchain

Home › Forums › FPGAs in FABRIC › FPGA valid sites for Esnet toolchain

Log In Register Lost Password

Tagged: ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 9, 2025 at 2:40 pm #8474
    Nishanth Shyamkumar
    Participant

      Hi,

      I am trying to use a U280 bitfile image on some of the sites. I had a list of all the sites that supported Esnet toolchain, however most of them fail with a smartnic-devbind error.
      The exact error from the logs are:

      sn-stack-ubuntu-smartnic-hw-1      | Available Hardware Targets:
      sn-stack-ubuntu-smartnic-hw-1      | ERROR: [Labtoolstcl 44-199] No matching targets found on connected servers: xilinx-hwserver
      sn-stack-ubuntu-smartnic-hw-1      | Resolution: If needed connect the desired target to a server and use command refresh_hw_server. Then rerun the get_hw_targets command.
      sn-stack-ubuntu-smartnic-hw-1      | ERROR: [Common 17-39] ‘get_hw_targets’ failed due to earlier errors.
      sn-stack-ubuntu-smartnic-hw-1      |
      sn-stack-ubuntu-smartnic-hw-1      |     while executing
      sn-stack-ubuntu-smartnic-hw-1      | “get_hw_targets”
      sn-stack-ubuntu-smartnic-hw-1      |     invoked from within
      sn-stack-ubuntu-smartnic-hw-1      | “foreach {target} [get_hw_targets] {
      sn-stack-ubuntu-smartnic-hw-1      |     puts “\t$target”
      sn-stack-ubuntu-smartnic-hw-1      | }”
      sn-stack-ubuntu-smartnic-hw-1      |     (file “/scripts/read_jtag_registers.tcl” line 4)
      sn-stack-ubuntu-smartnic-hw-1      | cat: /tmp/u280.jtag.registers.json: No such file or directory
      sn-stack-ubuntu-smartnic-hw-1      | Found JTAG USERCODE=
      sn-stack-ubuntu-smartnic-hw-1      | Found Target UserID=0x68193757
      sn-stack-ubuntu-smartnic-hw-1      | Running version does not match Target version, reprogramming
      sn-stack-ubuntu-smartnic-hw-1      | About to flash the following bitfile: /bitfiles/esnet-smartnic.bit
      sn-stack-ubuntu-smartnic-hw-1      | INFO: [Labtools 27-2285] Connecting to hw_server url TCP:xilinx-hwserver:3121
      sn-stack-ubuntu-smartnic-hw-1      | INFO: [Labtools 27-3415] Connecting to cs_server url TCP:localhost:0
      sn-stack-ubuntu-smartnic-hw-1      | INFO: [Labtools 27-3417] Launching cs_server…
      sn-stack-ubuntu-smartnic-hw-1      | INFO: [Labtools 27-2221] Launch Output:
      sn-stack-ubuntu-smartnic-hw-1      |
      sn-stack-ubuntu-smartnic-hw-1      |
      sn-stack-ubuntu-smartnic-hw-1      | ******** Xilinx cs_server v2023.1.0
      sn-stack-ubuntu-smartnic-hw-1      |   ****** Build date   : Apr 10 2023-15:59:24
      sn-stack-ubuntu-smartnic-hw-1      |     **** Build number : 2023.1.1681142364
      sn-stack-ubuntu-smartnic-hw-1      |       ** Copyright 2017-2022 Xilinx, Inc. All Rights Reserved.
      sn-stack-ubuntu-smartnic-hw-1      |       ** Copyright 2022-2025 Advanced Micro Devices, Inc. All Rights Reserved.
      sn-stack-ubuntu-smartnic-hw-1      |

       

      The bitfile flashes and the card is usable for me on the TACC website.
      Is there an updated list of which sites are supported for FPGA usage using Esnet toolchain.

      May 12, 2025 at 9:48 am #8478
      Komal Thareja
      Participant

        Hi Nishanth,

        Please find enclosed the most recent known status. Kindly note that users have the ability to flash their own binaries, so the actual state of the infrastructure may differ from what is captured in the attached sheet. As a first step toward addressing this, we are working to include notebook and Control Framework support in Release 1.9, enabling users to flash FPGAs within their workflows directly.

        Thanks,

        Komal

        May 13, 2025 at 5:40 pm #8495
        Nishanth Shyamkumar
        Participant

          Hi Komal,

          Thanks for sharing the latest list of sites supported by the Esnet toolchain.

          You mentioned the following,

          “Kindly note that users have the ability to flash their own binaries, so the actual state of the infrastructure may differ from what is captured in the attached sheet”

          I didn’t understand what you meant. Could you elaborate further?

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.