Home › Forums › FABRIC General Questions and Discussion › Availability of DPU-powered SmartNICs
- This topic has 8 replies, 3 voices, and was last updated 2 weeks, 1 day ago by
Komal Thareja.
-
AuthorPosts
-
April 9, 2025 at 10:56 pm #8426
Hi FABRIC Team,
I’m exploring options for experiments involving data processing units (DPUs) and wanted to ask whether any FABRIC sites currently provide access to DPU-powered SmartNICs, such as NVIDIA BlueField or similar hardware from other vendors.
If such resources are not currently available, are there any plans to support or integrate DPU-powered SmartNICs into the FABRIC in the near future?
Appreciate your time and support!
-
This topic was modified 7 months, 1 week ago by
Plabon Dutta.
April 10, 2025 at 12:49 pm #8431Hi Plabon,
We’re in the process of procuring BlueField DPUs and are planning to integrate them into the FABRIC infrastructure. While the timeline isn’t finalized yet, we’re tentatively looking at Summer or Fall 2025. Stay tuned for updates!
Thanks,
KomalApril 11, 2025 at 6:12 pm #8432Hi Komal,
Thank you for the update! That’s exciting news—we’ll be eagerly waiting.
Best regards,
PlabonJune 11, 2025 at 2:45 am #8600Hi Komal,
Any updates on the DPU integration?June 11, 2025 at 9:00 am #8601Hi Tanay,
We are in the process of procuring them. While they may not be available for the Summer release, we are targeting an incremental release or including them in the Fall 2025 release.
Best,
Komal
September 9, 2025 at 5:18 pm #8913Hi Komal,
Any updates on the Bluefiled integration? I checked the Fall updates and it doesn’t mention any Bluefields!Thanks,
TanaySeptember 12, 2025 at 10:14 am #8989Hi Tanay,
We’re in the process of deploying them and are targeting DPU availability at KNIT11 around October 13–14.
Best.
Komal
November 3, 2025 at 11:18 pm #9137Hi Komal, are the BF3s available for testing now?
output_table = fablib.list_sites() i used this to list all the resources, but i couldnt find any.Thanks!
November 4, 2025 at 3:12 pm #9145Hi Tanay,
BlueField-3 nodes are now available on FABRIC, and we currently offer two variants:
- ConnectX-7-100 – 100 G
- ConnectX-7-400 – 400 G
To provision and use them, your project lead will need to request access through the Portal under Experiment → Project → Request Permissions.
Best,
Komal1 user thanked author for this post.
-
This topic was modified 7 months, 1 week ago by
-
AuthorPosts
- You must be logged in to reply to this topic.