1. Building a network topology with l2bridge (switch) and router
Searching...

Building a network topology with l2bridge (switch) and router

Home › Forums › FABRIC General Questions and Discussion › Building a network topology with l2bridge (switch) and router

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 1, 2023 at 12:20 pm #4440
    Acheme Acheme
    Participant

      Hello,

      I am pretty new to FABRIC and curious how to quickly setup a network topology with a typical switch and router, nothing really fancy for now? Any pointer to a “fabric-example” will be appreciated.

      Thank you very much.

      Regards,

      Acheme

      June 1, 2023 at 12:52 pm #4441
      Ilya Baldin
      Participant

        Hello,

        Assuming you have gone through a QuickStart Guide pinned at the top of this forum https://learn.fabric-testbed.net/forums/topic/quick-start-guide/ you can find additional notebooks in the Jupyter Hub that show examples of what is possible.

        June 1, 2023 at 2:04 pm #4443
        Acheme Acheme
        Participant

          Thank you Ilya

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.