Home › Forums › FABRIC General Questions and Discussion › Hardware Steering – Connectx6
- This topic has 5 replies, 2 voices, and was last updated 4 months ago by
Komal Thareja.
-
AuthorPosts
-
November 29, 2024 at 11:45 pm #7871
Hello,
I have a node with the SmartNIC ConnectX6 – and I am trying to run the NVIDIA GPU Packet Processing application.
However, running the application throws this error`
mlx5_net: [mlx5dr_table_init_check_hws_support]: HWS not supported, cannot create mlx5dr_table
mlx5_net: [mlx5dr_table_create]: Failed to initialise table
mlx5_net: [mlx5dr_action_validate_hws_action]: Cannot create HWS action since HWS is not supported
<code></code>`According to the documentation (https://doc.dpdk.org/guides/nics/mlx5.html) HW Steering – NIC ConnectX-5 and before are not supported
That means it should have worked for my ConnectX6 node, right? Am I missing something, or is any additional config required?If anyone is familiar with this, please help me out! I can’t find any documentation or threads surrounding this on the internet! It would be a great help if anyone could help me figure this out.
Thanks,
TanayDecember 13, 2024 at 11:35 am #7950Hi Tanay,
I wanted to check if this issue is still unresolved. I haven’t had a chance to look into it yet, but I plan to review the documentation and experiment with a few approaches. I’ll share any updates or findings here after the holidays.
Thanks,
KomalJanuary 27, 2025 at 7:09 pm #8133Hi Komal,
It’s still unresolved. Do we have any updates?Thanks,
TanayJanuary 28, 2025 at 10:39 am #8134Hi Tanay,
Based on the details of the ConnectX-6 from one of the FABRIC VMs and the DPDK documentation you shared (DPDK MLX5 Guide), it appears that the ConnectX-6 available in FABRIC is not supported. We are currently working on integrating new BlueField DPUs, which may provide a suitable solution.
[root@Node2 ~]# lspci | grep X-6
06:00.0 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6]
07:00.0 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6]
[root@Node2 ~]# mstconfig -d 06:00.0 query
Device #1:
----------
Device type: ConnectX6
Name: MCX653106A-ECA_Ax
Description: ConnectX-6 VPI adapter card; H100Gb/s (HDR100; EDR IB and 100GbE); dual-port QSFP56; PCIe3.0 x16; tall bracket; ROHS R6
Device: 06:00.0
Thanks,
Komal
February 20, 2025 at 10:48 am #8266Hi Komal,
Just wanted to check if there is a timeline for integrating the BlueField DPUs.Thanks,
TanayFebruary 20, 2025 at 1:52 pm #8269Hi Tanay,
We are targeting a release for either Summer or Fall and will share more details once our plans are finalized.
Thanks,
Komal
-
AuthorPosts
- You must be logged in to reply to this topic.