1. INDI site, can’t route IPv4 (again)
Searching...

INDI site, can’t route IPv4 (again)

Home › Forums › FABRIC General Questions and Discussion › INDI site, can’t route IPv4 (again)

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 20, 2025 at 1:29 pm #8634
    Sunjay Cauligi
    Participant

      Slice a21b62f0-28b9-4ae1-9314-e291a51ac7c4

      Same as last time; I can SSH into my INDI nodes, but I can’t ping any IPv4 addresses from those nodes, nor can I ping their IPv4 addresses (neither FABNetv4 nor FABNetv4Ext) from nodes at other sites.
      The nodes were fine around 2-3 hours ago, so whatever happened was within the last couple hours.

      Was there another fiber cut?

      June 20, 2025 at 2:51 pm #8637
      Tom Lehman
      Participant

        The dataplane connection for the FABRIC INDI site is currently down.

        This only impacts slices which are using FABNet services that go over the dataplane connection to other FABRIC sites.

        Access to slice Virtual Machines, and FABRIC services within this FABRIC site, should work normally.

        The Indiana GigaPoP Network Operations Center is reporting a network outage for the fiber path from Indiana University to StarLight.

         

        Updates will be provided to the FABRIC Announcements Forum.

        June 21, 2025 at 12:10 pm #8645
        Tom Lehman
        Participant

          The FABRIC INDI dataplane is back in service.  FABNet services should be working again.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.