- This topic has 2 replies, 2 voices, and was last updated 5 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- The topic ‘NDN connection on DALL is unavailable’ is closed to new replies.
Home › Forums › FABRIC General Questions and Discussion › NDN connection on DALL is unavailable
Hello,
We used L2 Network interface between two nodes allocated at the DALL site, employing Named Data Networking (NDN) for connectivity. The face and route were configured using the NDN Forwarding Daemon (NFD). When we ran ndnping
and ndnpingserver
between these two nodes, we encountered a timeout error.
Interestingly, this issue did not occur at the CLEM site.
We conducted further tests using an example notebook. When we set the site to DALL, one node was successfully able to ping another node using the subnet IP.
we wonder if there any potential interface issues happened to DALL site.
Thanks,
Some specific details may be useful to continue the discussion on this.
Having the 2 examples (working case and non-working case) in place and sharing the slice IDs with us can be convenient.
Thanks for replying. We figured out that incorrect IP link setups caused the problem.