1. Ping not workin on one network out of many networks for the ERO example
Searching...

Ping not workin on one network out of many networks for the ERO example

Home › Forums › FABRIC General Questions and Discussion › Ping not workin on one network out of many networks for the ERO example

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 3, 2024 at 1:12 pm #7890
    Sourya Saha
    Participant

      Hi.
      I was trying out the ERO example. I noticed that the ping on the ERO with path 1 does not work and says destination host unreachable while the one on path 2 works. My slice ID is 25596982-69a6-4831-8807-e0ca87503749.

      • This topic was modified 2 weeks, 4 days ago by Sourya Saha.
      December 6, 2024 at 3:40 pm #7918
      Xi Yang
      Participant

        Hi Sourya,

        Your slice had expired. How were the EROs defined for both paths? Did you use a strict ERO (all sites along a full path) or a loose ERO?

        If you try this again, please also include the ID for the network service so that I can help check it on the network controller.

        -Xi

        December 6, 2024 at 3:42 pm #7919
        Sourya Saha
        Participant

          Hi Xi,
          I did use a strict ERO. I will create a slice again and comment back here with the ID.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.