1. Traffic Prioritization within the Same Site

Traffic Prioritization within the Same Site

Home Forums FABRIC General Questions and Discussion Traffic Prioritization within the Same Site

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #9345

    Dear FABRIC Team,

    I hope you are doing well. In my experiments, I am using L2PTP tunnels between sites with guaranteed bandwidth. However, within the same site, between the senders and the tunnel entry point, I suspect that cross traffic may be introducing jitter and packet loss.

    Is there any way to elevate the priority of this traffic within the site as well, in order to reduce the impact of other traffic?

    Thank you very much for your time and assistance.

    Best regards,

    Fatih Berkay Sarpkaya

    #9346
    Tom Lehman
    Participant

      Fatih,

      It sounds like you are seeing this cross traffic when using L2Bridge network service within a site, is that correct?  If so, are you using SharedNIC on your VM, which is an sriov interface,  so will be shared with others, and there is no good way to guarantee bandwidth.  If you use SmartNICs (25 G ConnectX-5 or 100G ConnectX-6) instead, then you can get dedicated bandwidth.

       

      Tom

      • This reply was modified 1 week, 2 days ago by Tom Lehman.
    Viewing 2 posts - 1 through 2 (of 2 total)
    • You must be logged in to reply to this topic.