1. Errors setting up new slices
Searching...

Errors setting up new slices

Home › Forums › FABRIC General Questions and Discussion › Errors setting up new slices

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 28, 2026 at 9:45 am #10020
    Nirmala Shenoy
    Participant

      I have tried to set up a slice in 2 sites, TOKY and CERN.

      I am repeatedly getting a parmiko error. See attached document.

      August 28, 2026 at 11:24 am #10023
      Komal Thareja
      Moderator

        Hi Nirmala,

        This could be an intermittent issue. Does your slice come up or are you still running into this?

        If your slice is up, could you please share your slice id?

        Best,

        Komal

        August 28, 2026 at 11:40 am #10024
        Nirmala Shenoy
        Participant

          Hello Komal,

          this is the second slice I was setting up on CERN the slice ID is f8e3ea1a-2cc0-4353-a981-24340e04a520.

          Btw – I just noticed that it finished setting up – so I am not sure what that error message was or how it resolved : -(

           

          thanks

          Nirmala

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.