1. Maintenance on FABRIC-MAX and FABRIC-NCSA on Wed 3/16/22 – 5pm ET
Searching...

Maintenance on FABRIC-MAX and FABRIC-NCSA on Wed 3/16/22 – 5pm ET

Home › Forums › FABRIC Announcements › Maintenance on FABRIC-MAX and FABRIC-NCSA on Wed 3/16/22 – 5pm ET

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 16, 2022 at 1:57 pm #1512
    Mert Cevik
    Moderator

      We will conduct a maintenance on MAX and NCSA. All workers will be rebooted. VMs will be back online after the reboot, however processes will have to be restarted.

      We are in the process of contacting the users who currently have active slivers and we set a tentative date of Wed (today) 5pm EST.  Both racks can be used for creating slices, however keep in mind that there will be an outage at some point. Updates will be posted for time changes (if any) and when this maintenance is completed.

      March 16, 2022 at 8:02 pm #1521
      Hussam Nasir
      Moderator

        This maintenance is now complete You can now resume your work.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.