NVIDIA BlueField-3 DPUs

[Ivan Torres]

Slice ID: 26676675-b9c4-4826-a1b9-05550877af0e

Thank you Komal

[Ivan Torres]

Hello Komal,

I was able to diagnose the problem myself, I no longer have the previous slice so I wanted to let you know so there is no confusion on what happened.

Thank you

[Ivan Torres]

Hello FABRIC team,
I have a slice reserving a DPU where I need certain firmware configurations to utilize dual ports for custom packet processing. Here are the next to boot config values, and I need a cold reset to activate these parameters:
—————————————–
FLEX_PARSER_PROFILE_ENABLE = 4
PROG_PARSE_GRAPH = True(1)
LAG_RESOURCE_ALLOCATION = PRE_ALLOCATION(1)
INTERNAL_CPU_MODEL = EMBEDDED_CPU(1)
—————————————–
Here is my slice id: b48eb2c1-4858-4d87-9100-4f7d591b41bc
Please let me what is expected after the cold reboot.
Thank you

[Mert Cevik]

Hello Ivan,

The slice that you indicated seems to be closed. Can you please check?

Also, would it be possible for you to start a new thread on the forum and indicate your request on it?
(This current thread was initially used for general information and it’s getting hard to follow)

Best regards,
Mert

[Ivan Torres]

Hello Mark,

Forgive for the complications. We are facing a deadline and attempting many workarounds after losing a certain resource.

I included an image that states I am unable to create a new topic, so sorry for the clutter.

The new slice ID where I am currently performing experiments is ‘039f276b-7884-4805-b5e4-8264b9e39c3e’

Thank you

[Mert Cevik]

Hello Ivan,

Cold-reboot completed. Please see below from your VM/DPU.

Configurations:                 Default           Current           Next Boot
* FLEX_PARSER_PROFILE_ENABLE    0                 4                 4
* PROG_PARSE_GRAPH              False(0)          True(1)           True(1)
INTERNAL_CPU_MODEL              EMBEDDED_CPU(1)   EMBEDDED_CPU(1)   EMBEDDED_CPU(1)
* LAG_RESOURCE_ALLOCATION       DEVICE_DEFAULT(0) PRE_ALLOCATION(1) PRE_ALLOCATION(1)

For the issue about forum that you cannot start a thread, it will be best to contact the FABRIC team.
You can use https://portal.fabric-testbed.net/help and the  FABRIC Account Help Portal link to raise your issue.

[Ivan Torres]

Hello Mert,

Thank you for the update.

Since the update the DPU has become inaccessible from my host node, so I decided to create a new slice to use the updated firmware capabilities. Though it seems as though the host testbed on the KANS site is down at the moment. This host testbed reserved the DPU, so I am unable to create a new slice sadly.

[Mert Cevik]

I will reach out to you directly over email and let’s switch to that channel for these issues.

[Author]

Posts