1. Obtain the NICs’ CRC specification
Searching...

Obtain the NICs’ CRC specification

Home › Forums › FABRIC General Questions and Discussion › Obtain the NICs’ CRC specification

Log In Register Lost Password

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 28, 2023 at 2:36 am #3893
    Arash SARABI
    Participant

      Hello, is it possible to obtain node-specific information such as the NIC’s CRC polynomials on ConnectX-6 or ConnectX-5?

      March 7, 2023 at 11:34 am #3935
      Ilya Baldin
      Participant

        My best suggestion is to check the output of lspci command once you have a slice with the card to get the version of hardware and firmware and then to look through Mellanox documentation on their website.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.