Slice stuck on configuring for a long time

[Meshal Alruwisan]

Hello,

Can you please delete this slice, It is stuck on configuration for a long time.

Slice ID: cf4a5724-80f9-4594-9391-505d465aff47

Thank you.

[Benjamin Formby]

Hi Meshal,

Have you checked from the fabric portal website if the slice is still configuring? You can also delete slices from here if it finished configuring. It is under the experiments tab -> “My Slices”

[Meshal Alruwisan]

Hi Benjamin, 

I wasn’t able to do that until today, since it was in the configuring state. But today it is changed to StableError and I was able to delete it.

 

Thank you. 

[Seena Vazifedunn]

Hey,

My slice out of nowhere without doing any modifications went to “configuring” state and has been stuck there for quite sometime.

Is there anyway to figure out why and how to fix it?

Hest is the slice ID: a5ae5844-1610-43d9-b4ec-c1db5c118447

 

Thank you.

[Mert Cevik]

Hello Seena,

This seems to be about the similar problem on a recent thread. I also checked the specific slice you mentioned on this thread, it’s something about the UTAH site causing problems. We can follow on the other thread.

Best regards,
Mert

[Author]

Posts