[Sarah Maxwell]

Also, I tried using both the 1.4.6 and 1.5.1 container’s again and neither worked.

[Sarah Maxwell]

Komal,

Here is the output of those commands in the bleeding edge container.

Thanks,

Sarah

[Sarah Maxwell]

There are no errors when I run the three install commands from the notebook, but the last command doesnt output anything in addition to the lsmod command still not outputing. Does this mean I’m missing a command for the install, or have an out of date command?

• This reply was modified 1 year, 5 months ago by Sarah Maxwell.

[Sarah Maxwell]

Ok your lspci configuration looks the same as mine, but when I run the lsmod it doesn’t output anything.

[Sarah Maxwell]

Oh! I haven’t since I ran the curl command, but I did when I installed it through the notebook.

Ok, I just ran the ‘sudo reboot’ command followed by the nvidia-smi command and it still puts out the failed to communicate with NVIDIA driver.

[Sarah Maxwell]

When I download from the repo index using the code provided I don’t receive an error and it looks like both the NVIDIA and CUDA driver’s installed properly. But, when I run node.execute(“nvidia-smi”) it still gives the error about failing to communicate to the NVIDIA driver.

I ran the curl command (via SSH) and it looks like it ran properly. I’ll attach an image of the output. I ran the same nvidia-smi command (in the notebook) after the curl command in the terminal and it still gave the communication failure.

• This reply was modified 1 year, 5 months ago by Sarah Maxwell.

[Sarah Maxwell]

Sure, this is at the TACC site.

[Sarah Maxwell]

It’s set up to select a random site that has rtx6000 available, but the one I most recently used was with MICH.

[Author]

Posts